Filter
Top Products
Sending Methods
4-2
Sending Faxes
4
Follow this procedure for memory sending:
1
Place the document on the platen glass or load it in the ADF ➞
press [FAX].
For details on the types of documents you can fax, their requirements, and how to
place or load documents, see Chapter 3, "Document Handling," in the Basic Guide.
NOTE
If sending an A5-size document, align it with the A4-size marks on the platen glass, or
adjust the slide guides to the A4 width and load the document in the ADF. Otherwise, the
recipient will not receive the whole document.
2
Adjust any necessary settings for your document.
• Press [Image Quality] to select the fax resolution. (See "Adjusting the Image Quality
(Fax Resolution)," on p. 4-5.)
• Press [Exposure] to select the scan density. (See "Adjusting the Exposure (Scan
Density)," on p. 4-6.)
3
Dial the recipient's fax/telephone number.
For details on the different dialing methods, see "Dialing Methods," on p. 4-7.
4
Press [Start].
If you are using the platen glass, you will be prompted when the page has been
scanned. Place the next page (for a multipage document) ➞ press [Start]. To start
sending, press [Set].
NOTE
To cancel memory sending, press [Stop/Reset]. (See Chapter 7, "System Monitor," in the
Basic Guide.)