Filter
Top Products
Printed colors of lines are inaccurate during HP-GL/2 printing
Printed colors of lines are inaccurate during HP-GL/2 printing
Cause Corrective Action
AdjustFaintLines is On in the Con-
trol Panel menu.
Setting AdjustFaintLines to Off in the Control Panel menu may help produce the expected
results. However, lines in some colors may appear broken.
HP-GL/2 jobs are printed 6 mm larger than specified
HP-GL/2 jobs are printed 6 mm larger than specified
Cause Corrective Action
The page size of the HP-GL/2 print job, as created in the source application, is
incorrect.
In the Control Panel menu, set Oversize to Off.
(See "Menu Settings.") ➔User's Guide
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
Cause Corrective Action
The page size of the HP-GL/2 print job, as created in
the source application, is incorrect.
Set Detect img size to Command priority or Detected size in the Control
Panel menu.
(See "Menu Settings.") ➔User's Guide
Set Conserve Paper to On in the Control Panel menu.
(See "Menu Settings.") ➔User's Guide
HP-GL/2 printing takes a long time
HP-GL/2 printing takes a long time
Cause Corrective Action
Large print jobs with a lot of data take longer to print. Please wait a while until printing is finished.
A job was printed when Input Resolution in the Con-
trol Panel menu was set to 600dpi.
In the Control Panel menu, set Input Resolution to 300dpi and print
again.
(See "Menu Settings.") ➔User's Guide
The printer stops when printing a HP-GL/2 job (the carriage stops moving)
The printer stops when printing a HP-GL/2 job (the carriage stops moving)
Cause Corrective Action
The printer is analyzing the print job. Please wait a while until printing is finished.
A job was printed when Input Resolution in the Con-
trol Panel menu was set to 600dpi.
In the Control Panel menu, set Input Resolution to 300dpi and print again.
(See "Menu Settings.") ➔User's Guide
Printed colors of lines are inaccurate during HP-GL/2 printing
iPF785 Series
Basic Guide
Troubleshooting HP-GL/2 problems
108