Filter
Top Products
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
CHAPTER 5 SERVICE MODE
5-50 T
<DENS>
Use it to fine-adjust the copy density auto correction mechanism.
If you have cleared the RAM on the DC controller PCB and replaced the PCB, be sure to
enter the settings indicated on the service label.
DENS-ADJ
Use it to correct the density of images (copier/printer).
Use it to correct the F-value table if the image is foggy or the high-density
area is fuzzy.
Range of 1 to 9; default: 5
adjustment
F05-401-07
COPIER>ADJUST>BLANK
<BLANK>
Use it to adjust the non-image width.
If you have cleared the RAM on the DC controller PCB and replaced the PCB, be sure to
enter the settings indicated on the service label.
BLANK-T
Use it to enter the leading edge non-image width.
Range of -100 to +100
adjustment
BLANK-B
Use it to enter the trailing edge non-image width.
Range of -100 to +100
adjustment
White
Copy density
Black
Original density
White
F9
F1
A lower setting
decreases fogging.
A higher setting
decreases fuzziness.
COPIER>ADJUST>DENS