Filter
Top Products
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
CHAPTER 5 SERVICE MODE
5-83 T
BODY
Use it to make machine-related settings.
MODEL-SZ
Use it to select the mode of indication by destination and of the ADF origi-
nal size detection.
Settings 0: AB (6R5E), 1: INCH (5R4E), 2: A (3R3E), 3: AB/INCH (6R5E)
FIX-CLN
Use it to set fixing cleaning mode:
• During last rotation after the end of printing, the fixing assembly is ro-
tated idly at 1/4 the fixing speed.
Settings 0: no cleaning (default)
1: once per 500 sheets; temperature control at 225 °C , idle rotation for
60 sec
2: once per 200 sheets; temperature control at 225 °C , idle rotation for
60 sec
3: once per 100 sheets; temperature control at 225 °C , idle rotation for
60 sec
4: not used
5: not used
FIX-TEMP
Use it to select a fixing control temperature.
Settings 0: disable (default)
1: place priority on productivity; keep control temperature constant: -
10 °C
2: keep control temperature constant: -6 °C
3: keep control temperature constant: -3 °C
4: place priority on fixing; keep control temperature constant: +3 °C
5: keep control temperature constant: +6 °C
6: keep control temperature constant: +10 °C
7: keep control temperature constant: +15 °C
HUM-SW
Use it to enable or disable the environment sensor.
Settings 0: auto control by environment sensor
1: fixed mode (for high humidity)
2: fixed mode (for normal humidity)
3: fixed mode (for low humidity)
(In 1, 2, or 3, the move of control does not depend on the environment
sensor.)
COPIER>OPTION>BODY