Canon LBP3950 Printer User Manual


 
91
Cause Toner is running out.
Remedy Press [
]. Although you can continue to
print for a while, have ready a new toner
cartridge. When you print a large amount of data,
or white patches appear on the images, replace
the toner cartridge with a new one. If the printer is
not online after closing the front cover, press [
].
Cause Paper of the size or type that cannot be fed from
the multi-purpose tray or paper cassettes is
specified.
Remedy If a paper source is specified, press [
],
then set <
> to < >.
Cause The output tray is full.
Remedy Remove the paper in the output tray.
<Warning Message>
Cause The toner cartridge has reached the end of its life.
Remedy Take the toner cartridge out of the printer and
replace it with a new one.
<Warning Message>
Cause There is a possibility that the toner cartridge is not
installed properly.
Remedy Remove the toner cartridge and reinstall it
properly.
<Auto Error Skip>
Cause The printer received data for 2-sided printing of a
paper size (including the paper orientation) or
paper type on which the printer cannot perform
automatic 2-sided printing.
Remedy Press [
] to continue printing. However,
the data on each side is printed on two pages.
<Auto Error Skip>
Cause The size of the paper loaded in the multi-purpose
tray is different from the setting for <
> specified from the computer or control
panel.
Remedy Match the size specified in <
> and the size of the loaded paper, and then
press [
].
Cause You are using LIPS LX Printer Driver, and you
loaded custom size paper of its long edges 312.0
mm (297.0 mm for a paper cassette) or less and
printed.
Remedy Load the paper in landscape orientation, then
print again.
Message
Cause and Remedy