Filter
Top Products
67
Checking Operations
This printer is equipped with a status print function that allows you to check the
menu settings and a font list function (LBP-2810 only) that allows you to print a list
of the fonts installed in the printer as well as a sample list.
Status Print
Currently available printer functions and a list of setting values are printed in a
status print. To perform a status print, follow the procedure described below.
NOTE
•
Status print is set to print on A4-size. You can print on other paper sizes, however the
status print data may be enlarged or reduced, and as a result a part of the status print
may be cut off or inclined.
•
The values that are programmed in the menus from the printer’s control panel are
reflected in the status print. For example, if duplex printing is programmed, the status
print will also be printed on both sides of the paper. However, the number of copies is
ignored and one sheet is printed at all times.
1
Press [
].
The
indicator is turned off and the printer gets ready for operation
using the control panel.
2
Press [
].
The message
appears on the display.
3
Press [
].