Filter
Top Products
23
OFF.
disappears after 4 seconds.
Press the POWER button on the top control or on
the remote control unit, and appears
on the screen.
Press the POWER button again to turn off the
projector. The POWER indicator starts to blink
red, and the cooling fans keep running. (You can
select the level of fans’ quietness and speed.
See “Fan” on page 62.) At this time, you can
unplug the AC power cord even if the fans are still
running.
1
2
3
When the projector has cooled down enough, the
POWER indicator stops blinking and you can turn
on the projector.
• When the Direct power on function is
set to On, the projector will be turned on
automatically by connecting the AC power
cord to an AC outlet (p.56).
• The running speed of cooling fans is
changed according to the temperature
inside the projector.
• Do not put the projector in a case before
the projector is cooled enough.
• If the WARNING indicator blinks or lights
red, see “WARNING indicator” on page 65.
• While the POWER indicator is blinking,
the lamp is being cooled down and the
projector cannot be turned on. Wait until
the POWER indicator stops blinking to turn
on the projector again.
• The fan rotation will terminate directly if the
AC power cord is unplugged immediately
after the projector is turned off.
• The projector can be turned on after the
POWER indicator turns red. The waiting
time to restart will be shortened when the
normal power-off processing for fan cooling
is completed, compared with the time the
AC power cord is immediately unplugged
after the power-off.
• When using the Direct Power Off
function, you can not restart the
projector immediately after the power
is disconnected. If the external power
supply is suddenly cut off, the fans stop
immediately. The lamp remains high
temperature and needs to be cooled.
You can disconnect the power cord from the wall
outlet or turn off the breaker even during projection
without pressing the POWER button.
Direct Power Off Function