Filter
Top Products
40
Select . The On-Screen Menu
disappears and appears. Press the OK
button to expand the image size. Use the Point
▲▼◄► buttons to pan the image. The Panning
function can work only when the image is larger
than the screen size. A projected image can be also
expanded by pressing the D.ZOOM + or the OK button
on the remote control unit.
To exit the Digital zoom +/- mode, press any button
except the D.ZOOM +/- buttons, OK and Point buttons.
Select . The On-Screen Menu
disappears and appears. Press the OK
button to compress image size.
The projected image can be also compressed by
pressing the D.ZOOM or the OK button on the remote
control unit.
To return to the previous screen size, select a screen
size from the Screen Size Adjustment Menu or select
an input source from the Input Source Selection Menu
(see page 30) again, or adjust the screen size with the
D.ZOOM +/- buttons.
• The minimum compression ratio is limited
depending on the input signal, when the
Keystone function is working or when the
custom is selected for the screen size.
• True and are disabled and
cannot be displayed when , 575i,
, , 1035i or is selected in the
PC System Menu (p.31).
• cannot be selected when
True is selected.
• The minimum compression ratio is limited at
Normal screen size.
• cannot be selected when ,
1035i, or is selected on AV
System Menu (p.43).
• When the 16:9 function is selected on Screen
aspect menu, is not available in the PC
and AV screen (pp.39, 49).
• When the 4:3 function is selected on Screen
aspect menu, is not available in
the AV screen (p.49).
When this function is set to On, the picture will be top/
bottom and left/right reversed. This function is used to
project the image from a ceiling-mounted projector.
Ceiling
When this function is set to On, the picture will be
left/right reversed. This function is used to project the
image from rear of the screen.
Rear
To reset the adjusted data, select Reset and press the
OK button. A confirmation box appears and then select
Yes. All adjustments will return to their previous figures.
Reset
This function is used to adjust keystone distortion of the
projected image. Use the Point ▲▼ buttons to choose
the item you want to adjust.
To correct keystone distortion, press the OK button.
Keystone appears on the screen. Use the Point ▲▼
buttons to correct keystone distortion (p.26).
To store or reset the keystone correction, press the
Point ► button.
............. Keep the keystone correction
even when the AC power cord is
unplugged.
Reset ............. Release the keystone correction when
the AC power cord is unplugged.
Ceiling
Rear
This function is used to project the image to a 4:3 or 16:9
projection screen.
....16:10 is the aspect of the LCD panel.
The original Screen Menu is available.
..... Set to a 16:9 projection screen.
..... Set to a 4:3 projection screen.