Filter
Top Products
46
An interlaced video signal can be displayed in
progressive mode. Select one of the following options.
......... Disabled.
L 1 ......... For an active picture.
L 2 ......... For a still picture.
....... For watching a lm. With this function, the
projector reproduces pictures faithful to the
original film quality.
Noise interference on the screen can be reduced.
Select one of the following options to get smoother
images.
......... Disabled.
L 1 ......... Lower reduction
L 2 ......... Higher reduction
and can not
be selected when the input signal is ,
, , 1035i or (p.43).
To reset the adjusted data, select Reset and press the
OK button. A confirmation box appears and then select
. All adjustments will return to their previous figures.
Reset
To store the adjusted data, select and press the
Point ► or the OK button. Use the Point ▲▼ buttons
to select one from User 1 to User 4 and press the OK
button.
A confirmation box appears and then select . Stored
data can be called up by selecting an in the
Image Mode Selection on page 44.
A confirmation box
appears and then
select .