Filter
Top Products
55
Use the Point ▲▼ buttons to enter a number. Press
the Point ◄► buttons to fix the number and move
the red frame pointer to the next box. The number
changes to . If you fixed an incorrect number,
use the Point ◄► buttons to move the pointer to
the number you want to correct, and then enter the
correct number.
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the pointer
to . Press the OK button so that you can start to
operate the projector.
If you entered an incorrect Logo PIN code,
and the number () will turn red for
a moment. Enter the correct Logo PIN code all over
again.
Logo PIN code can be changed to your desired four-
digit number. Press the OK button to select
. Current dialog
box appears, use the Point ▲▼buttons to enter the
correct code. The New Logo PIN code input dialog
box appears. Set a new Logo PIN code, confirmation
box appears, choose to set the new Logo PIN
code.
Be sure to note the new Logo PIN code and keep it
on hand. If you lost the number, you could no longer
change the Logo PIN code setting.
Use the Point ▲▼ buttons to switch On or , and
then press the OK button to make a choice.
After a correct Logo PIN code
is entered, the following dialog
box appears.
If you forget your Logo PIN code and unable to
change it, the Logo PIN code can be reset to the
factory default setting (4321) according to the
following procedures.
When you reset the Logo PIN code, the PIN code
and Key lock will be reset, as well.
1. Unplug the AC Power Cord from the AC outlet.
2. Hold down the OK button on the projector and
connect the AC Power Cord into the outlet
again. Keep holding down the OK button until
the POWER indicator lights. The Logo PIN
code returns to the factory default setting while
the Logo PIN code lock state will remain the
same as the previous set state.