Filter
Top Products
11
THE FOLLOWING STEPS ARE VERY IMPORTANT FOR ALL CANON PRINTERS.
5) Inserting the silicone nozzle seals.
a) Remove the printer head from your printer by lifting the print head lock arm.
The print head will then lift out
b) Remove the 5 silicone seals from your kit. During manufacture 2 seals may
stick together giving the appearance of a single seal.
c) Ensure each seal is clean by placing each seal onto the small pieces of double
sided tape provided. Please ensure both sides of the seal are cleaned. Use the
tweezers provided to remove each seal from the tape ensuring no dust, dirt or
oils are passed onto it from your hands.
d) Carefully place each silicone nozzle seal into position around each of the
printer heads as shown.