Filter
Top Products
24
13) Priming
a) Only prime your CISS if excess air (5cm or more) is present in the tubing. It is
recommended that priming is conducted in a suitable workspace. Please
ensure to wear gloves & have some tissues handy to soak up excess ink
before undertaking any priming.
b) Remove the CISS from the box and place it on a suitable work area with the
cartridges upside down. Remove the cover from the cartridge you are priming
by twisting it anticlockwise.
c) Release the roller clamp by rolling it up – This step is very important!
d) Remove the travel plug from the corresponding cartridge ink chamber.
Release the
tube clamp by
rolling up the
roller down
Travel plug
(air chamber)