Filter
Top Products
115
Projecting Data on USB Flash Memory (SX80)
Projecting an Image from a Digital Camera or an USB Flash Memory
Selecting an Image for Projection
This section describes the steps for selecting an image in the USB file browser and pro-
jecting on the screen.
■Selecting a Drive
If a USB flash memory is connected, skip this step.
If a USB memory card reader having multiple memory slots is connected, the drive (mem-
ory slot) list is displayed in the file list.
Select the drive in which the memory card is inserted with [ ] / [ ], and press the OK but-
ton.
• Active drives are displayed in white text, while inactive drives are grayed out.
• Icons indicate the memory card status of each drive. (They differ depending on the
connected equipment.)
■Selecting a Folder
If the image file is located in a folder, select the folder with [ ] / [ ], and press the OK but-
ton.
• To return to upper hierarchy, select and press the OK button.
Example 1) Memory card is inserted and recognized properly.
Example 2) Memory card is inserted but cannot be recognized.
The file system is destroyed or the projector cannot recognize its for-
mat.
<
<
Remote control Top control
<
<
Remote control Top control