Filter
Top Products
121
Setting an IP Address (SX80)
Operating the Projector over Network
■Resetting the IP Address Setting of the Computer
1 Turn off the projector, and remove the LAN cable.
2 Follow the steps 3 to 6 to restore the computer's IP address and subnet mask that you
have written down to the original values.
■Setting the Error Notification Message
1 Launch a web browser, enter "http://192.168.254.254" in the address bar, and press
the Enter key.
The login dialog box appears.
The supported web browsers is Microsoft Internet Explorer 6 or later.
2 In the password setting screen, enter "root" for [User name] and "system" for [Pass-
word], and click the [OK] button.
The projector's network setting screen appears on the web browser.
3 Click the [Settings] button on the network setting screen.
The menu screen appears.