Canon VF-1 Network Router User Manual


 
Corporate Headquarter: 16381 Cherokee Road Brooksville, Florida 34601 352-796-2693
Factory: 21B Squires St. Cortland, NY 13045 607-428-0627
The next step is to attach the sensor to the light bar. The sensor must he secured directly to the light for
best results as well as reliability. The sensor must be attached to the light so that is does not interfere
with the light in the actual scanned area. As previously mentioned, the best location is at the very end
of the bar that is under plastic trim or decals on the glass. It cannot be attached within the actual scan
area. First photos are from the Canon iR2880i.
Please note the sensor is held in place with a small ty wrap provided for you in the kit. The ty wrap
must be installed in such a way that it does not drag or rub anywhere.