Filter
Top Products
Chapter 3 Avaya P460 Chassis and Module Installation
Avaya P460 Installation and Maintenance Guide 13
Figure 3.7 Installing the Avaya P460 Fan Module
Caution: You need to replace the fan module within five minutes. If you do not, the
I/O modules are shut down automatically to prevent overheating of the modules.
If this occurs, turn off the chassis and turn it on again.
To install a fan module:
1 Remove the existing fan module.
a Loosen the fastening screws.
b Gently pull the module towards you.
2 Position the module in the slot with the screws to the right side of the chassis
(see Figure 3.7).
3 Gently slide the module in.
4 Gently tighten the screws.
P460
M
48
0
-F
A
N