Filter
Top Products
Chapter 9 User Authentication
58 Avaya P460 Installation and Maintenance Guide
Figure 9.1 illustrates the RADIUS authentication procedure:
Figure 9.1 RADIUS Authentication Procedure
RADIUS CLI Commands
In order to... Use the following command...
Enable or disable authentication for
the P460 switch. RADIUS
authentication is disabled by
default
set radius authentication
Set a primary or secondary
RADIUS server IP address
set radius authentication server
Configure a character string to be
used as a “shared secret” between
the switch and the RADIUS server.
set radius authentication secret
User attempts login
Local User
account
authenticated in
switch?
Perform log-in according
to user's priviliege level
to switch
Yes
Authentication
request sent to
RADIUS Server
No
User name and
password
authenticated?
Yes
Authentication Reject
sent to switch
User cannot access switch
embedded managegment
No