Filter
Top Products
Chapter 3 Avaya P460 Chassis and Module Installation
Avaya P460 Installation and Maintenance Guide 17
Figure 3.11 I/O Module Component Location
Key
1Module label
2Securing screws
3 Locking handles
I/O Module Installation Procedure
To install an I/O module:
1 Remove the blanking plate by unscrewing the captive screws and gently pulling
the plate towards you.
2 Open the locking handles at the edge of the front panel. See Figure 3.12.
3 Position the module as shown in Figure 3.12.
4 Gently slide the module in.
L Ensure the hooks on the locking handle are aligned with the matching holes on
the chassis.
5 Close the locking handles.
X The module slides back and connects to the backplane.
6 Gently tighten the screws.
L For module-specific information, refer to the Installation Guide shipped with
the module.
2
3
1
2
3