Filter
Top Products
GS c
Programming Reference
VERSAJET
[Name] Print counter
[Format] ASCII GS c
In count-down mode, the counter value is updated as [counter value – increase and
decrease value].
The counter print mode is set by GS C 0.
Hex 1D 63
Decimal 29 99
[Range] None
[Default] None
[Description] Sets the serial counter value in the print buffer and increments or decrements the counter
value.
[Notes]
After setting the current counter value in the print buffer as print data (a character string),
the printer updates counter value based on the count mode set.
In count-up mode, the counter value is updated as [counter value + increase and
decrease value].
In count-stop mode, the counter value is not updated.
In count-up mode, if the counter value is the maximum of the specified counter value, it
is forced to convert to the minimum value by this command.
In count-down mode, if the counter value is the minimum of the specified counter value,
it is forced to convert to the maximum value by this command.
156