Filter
Top Products
When the value of y, c1, c2, or x is out of the range, this command is canceled, and the
following data is processed as normal data.
Programming Reference
VERSAJET
This command can define user-defined characters for each font independently. To select
a font, use ESC ! or ESC M.
A user-defined character, downloaded graphics, and downloaded bit image cannot be
defined simultaneously.
When this command is executed, the downloaded bit image is cleared.
When GS * is executed, the user-defined character data is cleared.
Once the user-defined characters have been defined, they are available until ESC ?, GS
*, or ESC @ is executed; the user-defined characters are redefined; the power is turned
off; or the printer is reset.
The user-defined characters are not defined at the default, and the resident characters
are printed.
The relationship between the definition data and printing result is as follows.
Example: Downloaded character definition consists of 9 x 24 dots.
d1 d4 d7 d10 d13 d16 d19
d22 d25
MSB
LSB
d2 d5 d8 d11 d14 d17 d20 d23 d26
MSB
LSB
d3 d6 d9 d12 d15 d18 d21 d24 d27
MSB
LSB
Only the MSB can be printed in the third byte for vertical direction of font B. A
user-defined character and downloaded bit image cannot be defined simultaneously.
40