Filter
Top Products
ESC \
Programming Reference
VERSAJET
[Name] Set relative print position
[Format] ASCII ESC \ nL nH
Hex 1B 5C nL nH
Decimal 27 92 nL nH
[Range] 0≦nL 255, 0≦≦nH 255≦
[Description] Moves the print starting position to (nL + nH x256) x (horizontal or vertical motion unit) from
the current position.
[Notes]
The printer ignores any setting that exceeds the printing area.
When page mode is selected, the horizontal or vertical motion unit is used for the print
direction set by ESC T.
When the starting position is set to the upper left or lower right of the printing area using
ESC T, the horizontal motion unit is used.
When the starting position is set to the upper right or lower left of the printing area using
ESC T, the vertical motion unit is used.
Even if the vertical or horizontal motion unit is changed after changing the printing
position, the setting of the printing position will not be changed.
Even if underline mode is turned on, the underline will not be printed under the space
skipped by this command.
66