Supported Commands
Programming Reference
VERSAJET
In these tables, click any name to see the command description. Please refer following instructions before you
utilize these commands to configure your VersaJet:
Standard mode
: Enabled.
() : Enabled only when the command is used at the beginning of command codes.
: Enabled only when data is not present in the printer buffer.
Ignored : All command codes including parameters are ignored.
Page mode
: Enabled.
: Only for value setting.
Disabled : Parameters are processed as printable data.
Ignored : All command codes including parameters are ignored.
Classification
Executing : The changes do not affect the following data.
Setting : The changes do affect the following data until power off.
Note : The changes caused by “Flash Command” will be still valid after power on/off
.
15