CHAPTER
4-1
Cisco Aironet 1300 Series Wireless Outdoor Access Point/Bridge Hardware Installation Guide
OL-5048-06
4
Troubleshooting Autonomous Access Points and
Bridges
This chapter provides troubleshooting procedures for basic problems with the autonomous access
point/bridge (model: AIR-BR1310G). For the most up-to-date, detailed troubleshooting information,
refer to the Cisco Technical Support and Documentation website at the following URL:
http://www.cisco.com/en/US/products/hw/wireless/tsd_products_support_category_home.html
Sections in this chapter include:
• Checking the LEDs on an Autonomous Access Point/Bridge, page 4-2
• Power Injector, page 4-5
• Checking Power, page 4-6
• Checking Basic Configuration Settings, page 4-6
• Antenna Alignment, page 4-8
• Resetting the Autonomous Access Point/Bridge to the Default Configuration, page 4-10
• Reloading the Access Point/Bridge Image, page 4-11
• Obtaining the Autonomous Access Point/Bridge Image File, page 4-13
• Connecting to the Console Serial Port, page 4-14
• Obtaining the TFTP Server Software, page 4-15