Filter
Top Products
2-15
Cisco AC/DC Power System User Guide, R1.0
May 2006
Chapter 2 System Installation
2.3 Install AC Power Cables
Figure 2-13 Routing AC Cables
Step 8
AC cabling is routed through either side of the system shelf and secured using tie off points.
Step 9 AC cabling should be tied off inside the cabinet/rack.
Step 10 Repeat for all AC cables.
Step 11 Connect the terminated AC plug to the AC receptacle at the install location.
Note A separate AC receptacle is required for each AC cable, and each receptacle should be on its own
circuit breaker to maximize protection against AC circuit breaker failure.
124793