Filter
Top Products
D-9
Cisco 1760 Modular Access Router Hardware Installation Guide
78-13342-03
Appendix D Installing the Virtual Private Network Module
Installing the VPN Module in a Cisco 1760 Router
Closing the Cisco 1760 Chassis
After installing the VPN module on the motherboard, close the chassis by
following these steps:
Step 1 Slide the top cover of the router back on the bottom of the chassis by pushing it
in the opposite direction from that shown in Figure D-2, “Removing the Top
Cover of the Router,” on page D-5.
Step 2 Replace the screws that you removed when you opened the chassis. (See
Figure D-1, “Removing the Cisco 1760 Chassis Screws,” on page D-5.)