Filter
Top Products
2-5
Cisco 1760 Modular Access Router Hardware Installation Guide
78-13342-03
Chapter 2 Installation
Mounting the Router in a Rack
Attaching Brackets to the Rack
After you attach the brackets to the router, use the four supplied number-12
Phillips machine screws to securely attach the brackets to the rack, as shown in
Figure 2-3.
Caution Make sure that the fans on the side of the chassis are not blocked.
Figure 2-3 Attaching Brackets to the Rack
Attaching the Optional Cable Guide
Cisco recommends attaching the cable guide to prevent the cables from obscuring
the front panel of the router and the other devices installed in the rack. If the router
is in a 19-inch or 24-inch rack, use the supplied black screw, as shown in
Figure 2-4, to attach the cable guide to the left or right bracket.
Cisco 1700
Series
10/100 ETH
ERNET
AUX
CO
NSO
LE
PVDM 0
OK
OK
PWR
1
0
SLOT 0
OK
PVDM 1
OK
MOD
OK
1
0
SLOT 1
OK
LINK
100
FDX
ACT
COL
1
0
SLOT 2
OK
1
0
SLOT 3
OK
60941
Phillips machine screws