Filter
Top Products
8
17
In the Add this Web site to the Zone field,
enter the IP address of the switch.
Note: If the you plan to use Cluster
Management for switch configuration, you
must enter the address of the cluster command
switch. You can also enter the addresses of the
member switches, but they are not required. If
you plan to use Visual Switch Manager (VSM)
for switch configuration, you must enter theIP
address of each switch that you want to
manage. You do not need to delete the address
from the Trusted Sites list if the switch later
becomes a cluster member. Refer to the Cisco
IOS Desktop Switching Software
Configuration Guide for more information.
18
Click Add, and then click OK.
19
In the Internet Options window, click
Apply, and then click OK.
Displaying the Access Page
Once the browser is configured, display the
Cluster Management Suite access page:
1
Enter the IP address of the switch in the
Location field if you are using Netscape
(the Address field if you are using Internet
Explorer).
Note: You can cut and paste the switch IP
address from the window that you used to
complete the setup program.
2
Press Return. The universal access page
for your switch displays.
Note: You are prompted with a message if
your browser version is not supported.
3
Click Cluster Management Suite or
Visual Switch Manager to display the
appropriate Cluster Management
application.
For More Information
See the Catalyst 2900 Series XL Installation
Guide for detailed instructions on installing
the Catalyst 2900 series XL switch. See the
Cisco IOS Desktop Switching Software
Configuration Guide for detailed
instructions on using the Cluster
Management Suite and the CLI to configure
and manage switches. See the release notes
for recent information about the
Catalyst 2900 series XL switch.