Filter
Top Products
6
A Java browser plug-in is required to access the HTML interface. You can download the plug-in
from Cisco Connection Online (CCO). If you have a SmartNet support contract, you can log
in to the following URL and download the plug-in:
• http://www.cisco.com/cgi-bin/tablebuild.pl/cat2900XL
If you do not have a SmartNet contract, you can download the plug-in from the following URL:
• http://www.cisco.com/pcgi-bin/tablebuild.pl/cat2900XL
Follow the instructions that accompany the plug-in to install it on your computer.
After you have assigned an IP address to the switch and installed the plug-in, you can access the
switch from your browser and use the Cluster Management Suite to view or change
configuration settings. If this is a command switch, you can also use the Cluster Management
application to configure other switches. To use web-based tools, follow the procedure to set the
appropriate browser options.
The web-based tools support the following platforms and network browsers:
Note: Netscape Communicator version 4.6 is NOT supported.
The switch checks the browser version when starting a session to ensure that the browser is
supported. If the browser is not supported, the switch displays a warning message.
Note: Refer to the release notes for additional requirements for setting up your browser.
Access the Switch from Your Browser
Operating System
Minimum Operating System
Requirements
Netscape
Communicator
Microsoft Internet
Explorer
Windows 95 Service Pack 1 4.61 or 4.7 4.01a or 5.0
Windows 98 Second Edition 4.61 or 4.7 4.01a or 5.0
Windows NT Service Pack 3 4.61 or 4.7 4.01a or 5.0
Solaris 2.5.1
or higher
SUN-recommended patch
cluster for the OS and Motif
library patch 103461-24
4.61 or 4.7 Not supported