Filter
Top Products
2-7
Cisco IE 3010 Switch Hardware Installation Guide
78-19581-02
Chapter 2 Switch Installation
Installing the Switch
Figure 2-3 Inserting the Rubber Plug
Step 1 Identify your bracket mounting position. See Figure 2-6 or Figure 2-7.
Step 2 Insert the rubber plugs in the appropriate holes. See Figure 2-4 or Figure 2-5. Follow the same procedure
on the other side of the switch.
Step 3 Use a screwdriver or pen to completely push in the rubber plugs. See Figure 2-3.
Step 4 Install the brackets on both sides of the switch. See Figure 2-6 or Figure 2-7.
1 Rubber plug 3 Screwdriver
2 Switch
255738
2
3
1