Filter
Top Products
3-7
Cisco IE 3010 Switch Hardware Installation Guide
78-19581-02
Chapter 3 Power Supply Installation
Power-Supply Module Installation
Figure 3-6 Loosen the Screws on the Power Supply Blank
Figure 3-7 Remove the Power Supply Blank
Step 3 Insert the power-supply module into the slot, and gently push it in. See Figure 3-8. The power-supply
module should be flush with the switch.
Figure 3-8 Insert the Power-Supply Module
Step 4 Use a ratcheting torque screwdriver to torque each screw to 8–10 in-lb.
Wiring the Power Source
Before you wire the power source, review the warnings in this section:
Cisco IE 3010
Switch Series
208382
Cisco Connected Grid
Switc h 2500 Series
208383
208377