Filter
Top Products
C-2
Cisco IE 3010 Switch Hardware Installation Guide
78-19581-02
Appendix C Configuring the Switch with the CLI Setup Program
Accessing the CLI Through the Console Port
Figure C-1 Connecting the Console Cable
Step 3 Configure the baud rate and character format of the PC or terminal to match the console port
characteristics:
• 9600 baud
• 8 data bits
• 1 stop bit
• No parity
• None (flow control)
Step 4 Connect power to the switch as described in Chapter 3, “Power Supply Installation.”
Step 5 The PC or terminal displays the bootloader sequence. Press Enter to display the setup prompt. Follow
the steps in the “Completing the Setup Program” section on page C-7.
1 RJ-45 console port 2 Console cable (RJ-45-to-DB-9 adapter cable)
Cisco IE 3010
208386
2
1
1