Filter
Top Products
B-4
Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide
OL-9774-03
Appendix B Connector and Cable Specifications
Connector Specifications
Figure B-7 SFP Module Patch Cable (Only Catalyst 3560-E Switches)
126809
10/100 Ethernet Management Port
The 10/100 Ethernet management port uses standard RJ-45 connectors with Ethernet pinouts. Figure B-8
shows the pinouts.
Figure B-8 10/100 Port Pinouts
H5318
23145678Pin Label
1
2
3
4
5
6
7
8
RD+
RD-
TD+
NC
NC
TD-
NC
NC
Console Port
The console port uses an 8-pin RJ-45 connector, which is described in Table B-4 and Table B-5. The
supplied RJ-45-to-DB-9 adapter cable is used to connect the console port of the switch to a console PC.
You need to provide a RJ-45-to-DB-25 female DTE adapter if you want to connect the switch console
port to a terminal. You can order a kit (part number ACS-DSBUASYN=) containing that adapter from
Cisco. For console port and adapter pinout information, see
Table B-4 and Table B-5.