Cisco Systems 520 series Webcam User Manual


 
11-2
Cisco Secure Router 520 Series Software Configuration Guide
OL-14210-01
Chapter 11 Configuring Security Features
Configuring AutoSecure
For information about configuring AAA services and supported security protocols, see the following
sections of the
Cisco IOS Security Configuration Guide:
Configuring Authentication
Configuring Authorization
Configuring Accounting
Configuring RADIUS
Configuring TACACS+
Configuring Kerberos
Configuring AutoSecure
The AutoSecure feature disables common IP services that can be exploited for network attacks and
enables IP services and features that can aid in the defense of a network when under attack. These IP
services are all disabled and enabled simultaneously with a single command, greatly simplifying security
configuration on your router. For a complete description of the AutoSecure feature, see the
AutoSecure
feature document.
Configuring Access Lists
Access lists (ACLs) permit or deny network traffic over an interface based on source IP address,
destination IP address, or protocol. Access lists are configured as standard or extended. A standard
access list either permits or denies passage of packets from a designated source. An extended access list
allows designation of both the destination and the source, and it allows designation of individual
protocols to be permitted or denied passage. An access list is a series of commands with a common tag
to bind them together. The tag is either a number or a name.
Table 11-1 lists the commands used to
configure access lists.
Ta ble 11-1 Access List Configuration Commands
ACL Type Configuration Commands
Numbered
Standard access-list {1-99}{permit | deny} source-addr [source-mask]
Extended access-list {100-199}{permit | deny} protocol source-addr
[source-mask] destination-addr [destination-mask]
Named
Standard ip access-list standard name followed by deny {source |
source-wildcard | any}
Extended ip access-list extended name followed by {permit | deny} protocol
{source-addr[source-mask] | any}{destination-addr
[destination-mask] | any}