Filter
Top Products
1-9
Cisco Secure Router 520 Series Software Configuration Guide
OL-14210-01
Chapter 1 Basic Router Configuration
Configuring Basic Parameters
For complete information about the command line commands, see the Cisco IOS Release 12.3
documentation set.
Configuration Example
The following configuration shows the command-line access commands.
You do not need to input the commands marked “default.” These commands appear automatically in the
configuration file generated when you use the show running-config command.
!
line con 0
exec-timeout 10 0
password 4youreyesonly
login
transport input none (default)
stopbits 1 (default)
line vty 0 4
password secret
login
!
Step 5
exit
Example:
Router(config-line)# exit
Router (config)#
Exits line configuration mode, and returns to
global configuration mode.
Step 6
line [aux | console | tty | vty] line-number
Example:
Router(config)# line vty 0 4
Router(config-line)#
Specifies a virtual terminal for remote console
access.
Step 7
password password
Example:
Router(config-line)# password aldf2ad1
Router(config-line)#
Specifies a unique password for the virtual
terminal line.
Step 8
login
Example:
Router(config-line)# login
Router(config-line)#
Enables password checking at the virtual terminal
session login.
Step 9
end
Example:
Router(config-line)# end
Router#
Exits line configuration mode, and returns to
privileged EXEC mode.
Command Purpose