24-10
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 24 Routing Overview
Information About IPv6 Support
• Access group, using an IPv6 access list
• Static Routes
• VPN (all types)
• Failover
• Transparent firewall mode
IPv6-Enabled Commands
The following ASA commands can accept and display IPv6 addresses:
• capture
• configure
• copy
• failover interface ip
• http
• name
• object-group
• ping
• show conn
• show local-host
• show tcpstat
• ssh
• telnet
• tftp-server
• who
• write
The following commands were modified to work for IPv6:
• debug
• fragment
• ip verify
• mtu
• icmp (entered as ipv6 icmp)
Entering IPv6 Addresses in Commands
When entering IPv6 addresses in commands that support them, enter the IPv6 address using standard
IPv6 notation, for example:
ping fe80::2e0:b6ff:fe01:3b7a.