Filter
Top Products
3-2
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
Chapter 3 Installing Modules and Cables in the Chassis
Modular Port Adapters
Figure 3-1 shows the front panel of the chassis and connectors of the fixed 4x10-Gigabit Ethernet ports.
Figure 3-1 .4x10-Gigabit Ethernet SFP+ Ports
Modular Port Adapters
The Cisco ASR 9001 Router has two bays that support the following Modular Port Adapters (MPAs):
• 20-Port Gigabit Ethernet Modular Port Adapter
• 4-Port 10 Gigabit Ethernet Modular Port Adapter
• 2-Port 10 Gigabit Ethernet Modular Port Adapter
• 2-Port 40 Gigabit Ethernet Modular Port Adapter
• 1-Port 40 Gigabit Ethernet Modular Port Adapter
Note In the Cisco ASR 9001-S Router, one bay (MPA1) is disabled by default, and can be enabled by a license
upgrade.
20-Port Gigabit Ethernet Modular Port Adapter
The 20-Port Gigabit Ethernet modular port adapter provides 10 double-stacked SFP (20 total) cages that
support either fiber-optic or copper Gigabit Ethernet transceivers.
Each SFP cage on the Gigabit Ethernet modular port adapter has an adjacent Link LED visible on the
front panel. The Link LED indicates the status of the associated SFP port, as described in Table 4-4.
1 Service LAN and ToD ports 6 External USB port
2 10MHz and 1PPS indicators 7 Eight discrete LED indicators
3 SYNC (BITS/J.211) ports 8 CLUSTER ports
4 CONSOLE and AUX ports 9 Fixed SFP+ ports
5 Management LAN ports
1 3 4 5 6 687
332426
92