Filter
Top Products
3-23
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
Chapter 3 Installing Modules and Cables in the Chassis
Powering on the Router
Figure 3-14 Typical Power Connections for a Single DC Power Module
Step 4
Proceed to Powering on the Router, page 3-23.
Powering on the Router
Follow these steps to turn on power to either an AC-powered or DC-powered router:
Step 1 Switch on the circuit breaker to your power sources.
Step 2 Verify that the Power Input LED on each power module is lit.
Step 3 Set the power switch to the ON position.
Step 4 Verify that the Green Power LED on each power module is lit.
331933