Cisco Systems CF 911 P Printer User Manual


 
4-3
1. Setup Menu Summary
Setup Menu Settings Chapter 4
Setup Menu Hierarchy
The setup menu contains a number of levels of submenus under the main menu that were explained in the
chart on the previous page. A submenu is separated into four levels. The lowest levels are
[Network
Setup]
,
[Protocol Setup]
,
[IPX/SPX Setup]
and
[Frame Types]
.
Setup Menu Keys
The following keys are used to switch between the levels and menus.
, keys: These keys switch between the menus, items and setting values that are displayed. The oper-
ation corresponds to the sequence indicated by the arrow marks in the figure shown above.
These keys are also used to switch between numerical values and characters.
, keys: These keys shift the cursor horizontally within the display.
Set key: This key selects the menus and items that are displayed and the menu display and items in
the lower level. The operation corresponds to the horizontal arrow marks in the figure above.
Cancel key: This key interrupts the menu and items that are displayed and returns operation to the
menu and items at the previous upper level.
Main Menu Sub Menu Setting Items
Level 1 Level 2 Level 3 Level 4
Setup
Network Setup
Network Setup
Exit
Network Setup
Port Setup
Port Setup
Exit
To Ethernet Setup,
Parallel Setup
Network Setup
Protocol Setup
Protocol Setup
Exit
To AppleTalk Setup
TCP/IP Setup
Protocol Setup
IPX/SPX Setup
IPX/SPX Setup
Exit
IPX/SPX Setup
Frame Types
Frame Setup
Exit
Frame Setup
Ethernet ?
Server Setting Items
Network Setup End
Port Setup End
Protocol Setup End
IPX/SPX Setup End
Frame Setup End
Frame Type
Setting Items
key
Set key
Go to the Printer Setup
Go to the Service Setup
Go to the Clear Frames
From Server Setup
Setting Items
Setting Items
Setting Items