Filter
Top Products
6-33
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03
Chapter 6 Maintaining the Router
Removing and Replacing a DC PEM
Step 3 Remove the power supply from the chassis (Figure 6-17):
a. Loosen the captive screw on each ejector lever.
b. Pivot the levers open to release the power supply from its bay.
c. Slide the power supply out of its bay while supporting it with your other hand.
Warning
The power supply weighs approximately 10 lb (4.5 kg). Use two hands to remove
the power supply.
Figure 6-17 Releasing the DC Power Supply
101116
O
U
T
PU
T
O
K
IN
P
U
T
O
K
M
IS
W
IR
E