Filter
Top Products
Contents
viii
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03
Connecting to the Console and Auxiliary Ports 3-14
GRP Console and Auxiliary Ports 3-14
PRP Console and Auxiliary Ports 3-18
Installing a Flash Memory Card 3-20
Connecting the GRP to an Ethernet Network 3-22
Connecting the PRP to an Ethernet Network 3-25
Connecting to an AC Power Source 3-29
Connecting to a DC Power Source 3-32
Power On the Router 3-35
IOS Software Configuration for the Router 3-37
Cisco IOS Software Images 3-37
Conditions to Check Before System Startup 3-38
Overview of the Boot Process 3-39
Starting the Router and Observing Initial Conditions 3-39
Manually Booting the System 3-47
Router Configuration 3-49
Cisco IOS User Interface 3-50
User Interface Command Modes 3-50
Configuration Changes 3-53
setup Command Interactive Script Example 3-54
Configuring Global Parameters 3-57
Configuring Network Interfaces 3-58
Checking the Software Version 3-61
Verifying the Running Configuration Settings 3-62
Saving the Running Configuration Settings to NVRAM 3-64
Reviewing the Running Configuration Settings 3-64
Using Flash Memory Cards in the RP 3-66
Installing the Flash Memory Card in a RP 3-66
Removing the Flash Memory Card from an RP 3-67