Filter
Top Products
3-46
Cisco MDS 9000 Family NX-OS Interfaces Configuration Guide
OL-29284-01, Release 6.x
Chapter 3 Configuring Fibre Channel Interfaces
Configuration Examples for Fibre Channel Interfaces
Configuration Example for 48-Port 8-Gbps Module Interfaces
These steps describe how to configure the 48-port 8-Gbps module interfaces:
Step 1 Select the interfaces fc 4/1 through fc 4/2.
switch# config t
switch(config)# interface fc 4/1 - 2
Step 2 Configure the port speed, rate mode, and port mode on the interfaces.
switch(config-if)# switchport speed 8000
switch(config-if)# switchport rate-mode shared
switch(config-if)# switchport mode f
Step 3 Enable the interfaces and return to configuration mode.
switch(config-if)# no shutdown
switch(config-if)# exit
switch#
Step 4 Select the interfaces fc 4/3 through fc 4/4.
switch# config t
switch(config)# interface fc 4/3 - 4
Step 5 Configure the port speed, rate mode, and port mode on the interfaces.
switch(config-if)# switchport speed auto max 4000
switch(config-if)# switchport rate-mode dedicated
switch(config-if)# switchport mode f
Step 6 Enable the interfaces and return to configuration mode.
switch(config-if)# no shutdown
switch(config-if)# exit
switch#
Step 7 Select the interfaces fc 4/5 through fc 4/6.
switch# config t
switch(config)# interface fc 4/5 - 6
Step 8 Configure the port speed, rate mode, and port mode on the interfaces.
switch(config-if)# switchport speed auto max 4000
switch(config-if)# switchport rate-mode shared
switch(config-if)# switchport mode f
Step 9 Enable the interfaces and return to configuration mode.
switch(config-if)# no shutdown
switch(config-if)# exit
switch#
Configuration Example for 24-Port 8-Gbps Module Interfaces
These steps describe how to configure the 24-port 8-Gbps module interfaces: