CHAPTER
2-1
Cisco MWR 1900 Mobile Wireless Edge Router Hardware Installation Guide
78-13982-02
2
Preparing to Install the Router
This chapter describes site requirements and equipment needed to install your Cisco MWR 1900 router.
It includes the following sections:
• Safety Recommendations, page 2-1
• General Site Requirements, page 2-3
• Installation Checklist, page 2-5
• Console and Auxiliary Port Considerations, page 2-6
• Inspecting the Router, page 2-4
• Required Tools and Equipment for Installation and Maintenance, page 2-3
• Console and Auxiliary Port Considerations, page 2-6
Safety Recommendations
Follow these guidelines to ensure general safety:
• Keep the chassis area clear and dust-free during and after installation.
• Keep tools away from walk areas where you or others could fall over them.
• Do not wear loose clothing that may get caught in the chassis. Fasten your tie or scarf and roll up
your sleeves.
• Wear safety glasses when working under conditions that may be hazardous to your eyes.
• Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
Warning
Only trained and qualified personnel should be allowed to install or replace this
equipment.