Filter
Top Products
5-15
Cisco Content Services Switch Security Configuration Guide
OL-5650-02
Chapter 5 Configuring Firewall Load Balancing
Displaying Firewall Flow Summaries
Displaying Firewall Flow Summaries
Use the show flows command to display the flow summary for a source IP
address, or for a specific source address and its destination IP address on a Switch
Processor (SP) in a CSS. You can display up to 4096 flows per SP.
This information allows you to:
• Identify which firewall is used for a particular flow
• View flows to ensure the proper operation of FWLB
The syntax is:
show flows source_address destination_address
The variables are:
• source_address - The source IP address for the flows. Enter the address in
dotted-decimal format (for example, 192.168.11.1).
• destination_address - The destination IP address. Enter the address in
dotted-decimal format (for example, 192.168.11.1).
For example:
(config)# show flows 192.165.22.1 192.163.2.3
To display the flows for a specific source IP address, enter:
(config)# show flows 192.165.22.1
To display the flows for specific source and destination IP addresses, enter:
(config)# show flows 192.165.22.1 192.163.2.3