Filter
Top Products
Chapter 3 Configuring the CSS as a Client of a RADIUS Server
Configuring a RADIUS Server for Use with the CSS
3-4
Cisco Content Services Switch Security Configuration Guide
OL-5650-02
The following running-configuration example shows the results of entering the
commands in Table 3-1.
!*************************** GLOBAL ***************************
radius-server primary 172.27.56.76 secret Hello auth-port 1645
radius-server secondary 172.27.56.79 secret Hello auth-port 1645
virtual authentication primary radius
Configuring a RADIUS Server for Use with the CSS
This section provides background information on the setup of a RADIUS server.
It is intended as a guide to help ensure proper communication with a RADIUS
server and a CSS operating as a RADIUS client.
The following sections summarize the recommended settings for the Cisco Secure
Access Control Server (ACS) when used as a centralized RADIUS server with the
CSS.
5. Use the virtual authentication command to configure the primary,
secondary, and tertiary virtual authentication method. See Chapter 1,
Controlling CSS Access.
#(config) virtual authentication primary radius
6. (Recommended) Use the show radius command and its options to display
information and statistics about the RADIUS server configuration. See the
“Showing RADIUS Server Configuration Information” section.
(config)# show radius config all
(config)# show radius statistics all
Table 3-1 RADIUS Configuration Quick Start (continued)
Task and Command Example