Filter
Top Products
2-7
Cisco Content Services Switch Security Configuration Guide
OL-5650-02
Chapter 2 Configuring the Secure Shell Daemon Protocol
Showing SSHD Configurations
To display the SSHD sessions, enter:
# show sshd sessions
Listen Socket Count The number of sockets that SSHD is currently listening
on (not currently configurable, default is 1).
Listen Port The port number that SSHD uses to listen for client
connections (set by the sshd port command). The
default is 22 (the default port for SSH). The port
number is 22 or from 512 to 65535.
Listen Address The address that SSHD uses to listen for client
connections (not currently configurable; default is
0.0.0.0).
Server Key Bits The number of bits to use when generating the SSHv1
server key. The default is 768. The range is from 512
to 1024.
RSA Protocol (SSH1) The status of SSHv1 access (not currently
configurable; default is enabled).
Empty Passwords Disabled. The username must always have an
associated password.
Keepalive The status of sending a TCP keepalive to the client:
Enabled or Disabled. SSHD keepalive is enabled by
default.
SSH2 Cipher List A list of SSHv2 cipher suites supported for
authentication, encryption, and data integrity between
the client and the server.
Table 2-1 Field Descriptions for the show sshd config Command (continued)
Field Description