Filter
Top Products
Chapter 1 Controlling CSS Access
Configuring Network Qualifier Lists for ACLs
1-36
Cisco Content Services Switch Security Configuration Guide
OL-5650-02
Creating an NQL
Enter the name of the new NQL you want to create or an existing NQL. Enter the
name as an unquoted text string with no spaces and a maximum of 31 characters.
You can create a maximum of 512 NQLs per CSS.
For example, enter:
(config)# nql bypass_nql
(config-nql[bypass_nql])#
To display a list of existing NQLs, use the nql ? command. If no NQLs currently
exist, the CSS prompts you to enter a new name.
To remove an existing NQL, use the no nql command. For example, enter:
(config)# no nql bypass_nql
Describing an NQL
To provide a description for an NQL, use the description command in NQL
mode. Enter the NQL description as a quoted text string with a maximum length
of
63 characters.
For example, enter:
(config-nql[bypass_nql])# description “Bypass services”
Adding Networks to an NQL
To add a maximum of 512 networks or services to an NQL, use the ip address
command. Enter an IP address with either a subnet prefix or a subnet mask. You
may also add an optional description for the IP address and turn on logging.
The syntax and options are:
ip address ip_address[/subnet_prefix| subnet_mask] {“description”}{log}