Filter
Top Products
5-17
Cisco Content Services Switch Security Configuration Guide
OL-5650-02
Chapter 5 Configuring Firewall Load Balancing
Displaying Firewall IP Information
Displaying Firewall IP Information
Use the show ip firewall command to display the configured values of the IP
firewall keepalive timeout and the state of each firewall path configured on the
CSS. For example:
(config)# show ip firewall
Table 5-3 describes the fields in the show ip routes output.
Table 5-3 Field Descriptions for the show ip routes firewall Command
Field Description
IP Firewall
KAL Timeout
The number of seconds the CSS will wait to receive a keepalive
message from the remote CSS before declaring the firewall
unreachable.
Firewall Index The index number to identify the firewall.
State The current state of the connection to the remote switch (Init,
Reachable, or Unreachable).
Next Hop The IP address used for the next hop.
Remote
Firewall
The IP address of the firewall on the remote subnet that
connects to the remote CSS.
Remote Switch The IP address of the remote CSS.
Time Since
Last KAL Tx
The length of time since the last keepalive message was
transmitted.
Time Since
Last KAL Rx
The length of time since the last keepalive message was
received.