Filter
Top Products
2
Cisco XR 12000 Series Router Ethernet Line Card Installation
OL-7861-01
Important Information
Important Information
This section contains information about the following topics:
• Ethernet Line Card Product Numbers, page 2
• Router Hardware Installation, page 2
• Cisco IOS Software Release and Hardware Revision Requirements, page 3
• Memory Options, page 4
• Related Documentation, page 4
Ethernet Line Card Product Numbers
Table 1 lists the Cisco product numbers to which this publication applies. This guide replaces the
individual Ethernet line card installation documents for the Cisco 12000 Series Router.
Router Hardware Installation
For hardware installation information for Cisco XR 12000 Series Routers, refer to the installation guide
for your router. The guide includes information on the router switch fabric and how it affects operation
of the line card, as well as line card slot locations, slot width, and other requirements.
Also refer to the field-replacable unit (FRU) publications that describe how to install, maintain, and
replace router subsystems, such as cooling fans, power supplies, chassis backplanes, and so on.
Supported Platforms
Table 2 lists the supported router platforms for Ethernet line cards:
Table 1 Ethernet Line Card Product Numbers
Ethernet Line Card Cisco Product Number
4-Port Gigabit Ethernet Internet Services
Engine (ISE) Line Card
4GE-SFP-LC=
10-Port 1-Gigabit Ethernet Line Card 10X1GE-SFP-LC=
10X1GE-SFP-LC-B=
1-Port 10-Gigabit Ethernet Line Card 1X10GE-LR-SC=
1X10GE-ER-SC=
Table 2 Ethernet Line Card Supported Router Platforms
Ethernet Line Card Supported Platform
4-Port Gigabit Ethernet ISE All Cisco 12000 Series Routers
10-Port 1-Gigabit Ethernet All Cisco 12400 and 12800 Routers
1-Port 10-Gigabit Ethernet All Cisco 12400 and 12800 Routers