Filter
Top Products
4
Cisco XR 12000 Series Router Ethernet Line Card Installation
OL-7861-01
Product Overviews
Memory Options
Ethernet line card memory options vary by line card. See “Line Card Memory” section on page 64 for
more information.
Related Documentation
This publication describes the basic installation of a Ethernet line card. For complete configuration
information, refer to the following publications:
• Cisco IOS XR Interface and Hardware Component Configuration Guide, Release 3.2
• Cisco IOS XR Interface and Hardware Component Command Reference, Release 3.2
• Cisco IOS XR Release 3.2 Release Notes for Cisco XR 12000 Series Routers
• Regulatory Compliance and Safety Information for Cisco XR 12000 Series Routers
See the “Obtaining Documentation” section on page Boilerplate 1 for information on how to obtain these
publications.
Product Overviews
The following sections provide information about the Ethernet line card products:
• 4-Port Gigabit Ethernet ISE Line Card, page 5
• 10-Port 1-Gigabit Ethernet Line Card, page 6
• 1-Port 10-Gigabit Ethernet Line Card, page 8
Ethernet Line Card Comparison
Table 4 provides comparative information about Ethernet line cards. The first Ethernet line card has a
Fast Ethernet interface and the others have a Gigabit Ethernet interface.
Table 4 Ethernet Line Card Hardware Comparison
Ethernet Line Card
Line Card
Part Number Ports
GBIC
Pluggable
SFP
Pluggable
Insertable EPA
Daughter Card Cable and Connector
4-Port Gigabit
Ethernet ISE
4GE-SFP-LC= 4 X Single-mode or multimode fiber
with LC connectors (depends on
SFP)
10-Port 1-Gigabit
Ethernet
10X1GE-SFP-LC= 10 X Single-mode or multimode fiber
with LC connectors (depends on
SFP)
10X1GE-SFP-LC-B= 10 X Single-mode or multimode fiber
with LC connectors (depends on
SFP)