Filter
Top Products
23
PA-4C-E 1-Port High-Performance ESCON Channel Port Adapter Installation and Configuration
OL-3743-02
Removing and Installing Port Adapters
Port Adapter Removal and Installation
In this section, the illustrations that follow give step-by-step instructions on how to remove and install
port adapters. Although the procedures may refer to a particular type of port adapter, the steps are the
same for installing and removing all types of port adapters. This section contains the following
illustrations:
• Cisco 7200 Series Routers and Cisco 7200 VXR Routers—Removing and Installing a Port Adapter,
page 24
Caution When performing the following procedures, wear a grounding wrist strap to avoid ESD damage to the
card. Some platforms have an ESD connector for attaching the wrist strap.
Warning
Hazardous voltage or energy is present on the backplane when the system is operating. Use caution
when servicing. Statement 1034
Caution When powering off the router, wait a minimum of 30 seconds before powering it on again.